Split-face surface of Brazilian Black Granite, photographed from above

Brazilian Black Granite

Translucent serpentinized black granite with an opaque green hue — from Brazil.

Products

Driveway Pavers

Granite setts of 300 × 100 mm in plan, each with a split-face top surface and natural cut-face sides. Three thicknesses, matched to the traffic the driveway will carry.

Split-face top surface of the granite, photographed from above
Split-face topThe craggy natural surface of the stone, on every paver.
Natural cut face of the granite — the smooth sawn band along the side of the stone
Natural cut-face sidesThe smooth sawn band of the stone forms each side.
A granite paver block showing the split-face top and cut-face sides
The blockSplit-face top over cut-face sides, as cut.

Driveway Paver – Cars

300 × 100 × 50 mm (11.8″ × 3.9″ × 2″)

ApplicationDriveway paving, cars and SUVs — axle loads up to 3.5 tonnes.

Installation

Lay on a minimum 150 mm compacted sub-base with a full mortar bed — never on loose sand.

Plan size
300 × 100 mm
Thickness
50 mm
Top surface
Split-face
Sides
Natural cut face
Material
Natural granite
Isometric view of the 50 mm driveway paver block at true proportions — split-face top over cut-face sides
3/4 Isometric View45 degree view
Top view of the 50 mm driveway paver — the split-face surface, 300 mm × 100 mm
Top View300 mm × 100 mm (11.8″ × 3.9″)
Side profile of the 50 mm driveway paver — the clean cut face, 50 mm thick
Side View (Profile)50 mm (2″) thick

Driveway Paver – Delivery Vans

300 × 100 × 60 mm (11.8″ × 3.9″ × 2.4″)

ApplicationDriveway and access paving, cars and small delivery vans — axle loads up to 3.5 tonnes.

Installation

Lay on a minimum 150 mm compacted sub-base with a full mortar bed — never on loose sand.

Plan size
300 × 100 mm
Thickness
60 mm
Top surface
Split-face
Sides
Natural cut face
Material
Natural granite
Isometric view of the 60 mm driveway paver block at true proportions — split-face top over cut-face sides
3/4 Isometric View45 degree view
Top view of the 60 mm driveway paver — the split-face surface, 300 mm × 100 mm
Top View300 mm × 100 mm (11.8″ × 3.9″)
Side profile of the 60 mm driveway paver — the clean cut face, 60 mm thick
Side View (Profile)60 mm (2.4″) thick

Driveway Paver – Heavy Vehicles

300 × 100 × 80 mm (11.8″ × 3.9″ × 3.15″)

ApplicationHeavy driveway and commercial access paving, frequent delivery and service vehicles — axle loads up to 8 tonnes.

Installation

Lay on a minimum 150 mm compacted sub-base with a full mortar bed — never on loose sand.

Plan size
300 × 100 mm
Thickness
80 mm
Top surface
Split-face
Sides
Natural cut face
Material
Natural granite
Isometric view of the 80 mm driveway paver block at true proportions — split-face top over cut-face sides
3/4 Isometric View45 degree view
Top view of the 80 mm driveway paver — the split-face surface, 300 mm × 100 mm
Top View300 mm × 100 mm (11.8″ × 3.9″)
Side profile of the 80 mm driveway paver — the clean cut face, 80 mm thick
Side View (Profile)80 mm (3.15″) thick

Dimensional Cladding

A full-size exterior panel in the same stone — split-face texture across a 36″ × 18″ face.

Product codePBG 18 × 36 × 3/4

The split-face texture is based on the deeply craggy surface of the natural stone — a rugged, shadowed surface in pure deep black, suited to exterior cladding, footpath walkways, retaining walls, and patio and pool surround features.

Size
36.0″ × 18.0″ × 3/4″ (91.4 × 45.7 cm × 1.9 cm)
Texture
Split-face finish
Colour
Pure deep black
Material
Natural granite
Application
Exterior stone
Dimensional cladding panel showing the split-face surface and cut edge
Panel viewSplit-face surface with a clean cut edge.
Side profile of the cladding panel — the clean cut face of the stone, shown enlarged
Side profileSplit-face top over the cut face (shown enlarged).

Get a Quote

Tell us about your project — the product, the quantities, where it is going and when you need it. Add photos, drawings or documents if you have them.

Site photos, drawings or documents. Your files are listed in the email we prepare — please attach them to that email before you send it.

    Sending opens your email addressed to info@newsuncontracting.com with your details filled in — attach any files you chose above, then press send in your email.